Data sheet
We use this data sheet for speeding up the work between us and our customers.
It occurs regularly that some pieces of certain, essential information miss the order, or the offer-request.
In cases like this new telephone calls and negotiations need, which take up much time.
On the other hand the time is an important factor at all work!
Here an example onto the data sheet's filling in:
Name |
Number of drawing (dwg) |
Number of drawing (dwg) |
ordered |
Material: |
Thickness of the sheet: |
hook |
bend_of_hookt_02145 |
hook_ter_02145 |
500 |
KO33(WNR1.4301) |
1 |
coating |
bend_of_coating_00182 |
coating_ter_00182 |
120 |
A38(H2Hfinomlemez) |
1,5 |
corbel_02 |
bend_of_corbel_002 |
corbel_ter_002 |
60 |
Al99,5 |
5 |
Name: arbitrary name for identifying the component
It cannot contain any characters or block capitals
Number of the drawing(dwg): it is necessary to enclose a bending drawing if there is bending on the component.
If it is possible, it should be an 1:1 scaled ‘cad’ drawing.
If there is an opportunity it should be sent in ‘dwg’ extension, because if a size is missing, we ourselves can also scale it.
Let us pay attention to the special characters and the block capitals here.
The number of the drawing (dxf): implies the name of the component to be cut.
In this attached drawing there should not be any inscriptions, comments, sizes and anything else, only the clear scale place outline.
If it implies something else we have to wipe it singly, since the machine wants to cut all lines out then
Let us pay attention to the special characters and the block capitals here.
Ordered: how many pieces are needed from the given component.
Ordered: how many pieces are needed from the given component.The names of the three substances used mostly are there on the left side of the table.
The thickness of the sheet: the thickness of the sheet, which is used for making the component.